The only requirement for the beginning of the process of obtaining a quote for your Markham windows and doors replacement is a measuring tape, an assistant, and a tracking form. Are you using a prybar to open your windows? Do you have a wobbly and rotten door threshold? Do your curtains flutter in the wind even if the windows are shut? In case you find yourself in any of the following situations, then it is high time that you change your windows and doors.
In the past, if you were to decide that you needed new windows and doors, you would probably set up several appointments with different salespeople and have them come to your home to measure and show you different style options and prices. These days, however, it is perhaps advisable to have a digital meeting to talk about the process of replacing windows. But where does this leave you when you still need to know the measurements of your windows and doors Markham to get a realistic quote? You can do your own measuring, and it is very easy to do so. Here’s how.
- Enlist a Helper
Windows and doors measuring can be done by one person, however, it will be much faster with the assistance of the second person. Your helper should note down the measurements. To ensure that no wrong measurement is taken, after reading the measurements, they should repeat the numbers you read back as you cross check the dimensions. Measuring larger windows and doors Markham is also easier with a helper holding one end of the tape measure.
- Prepping to Measure Windows
Replacing windows is somewhat easier than refitting new windows completely. But your window frames should be in good shape or else they won’t be strong enough to support the new replacement windows. When preparing for measurement, examine the frames, sashes, trim, and sashes for the following signs of water damage or rot:
- Discoloration.
- Peeling paint
- Rotten wood that you can as well see.
- Hard to open or close
- Easily compressible lumber that disintegrates into dust.
- Condensation or fog that is hard to wipe away.
- Cracks at the edges of the window’s interior casing trim
- Illumination eliminating via the spaces in the window frame
If your windows are damaged or not in square shape, then you may need to consult a window frame repair firm to sort the problem out before proceeding with the installation of new windows.
- How to Measure for Replacement Windows
This makes it possible for anyone who doesn’t need to be an expert or even know the parts of a window to measure the same before engaging in the replacement process of the same.
- Measure The Width
From inside your house, you can use a tape measure to measure from the inner lip of one side jamb to the other. The side jamb is the vertical trim on either side of the window. If your window has drywall instead of jambs, you can measure the length between the drywalls on both sides.
- Measure The Height
Take the distance from the bottom of the window to the top. Sill is used to denote the lowest horizontal member of the trim. If your window is finished at the top with drywall and no head jamb, then just measure to the drywall. To the nearest inch, measure and document your result.
- How To Measure for Replacement Doors
It is almost the same as calculating door measurements for replacement although the constituents of a door are not exactly the same as those of a window.
- Measure The Width
With a tape measure, stand in the interior of your house and measure the thickness of one side jamb from the inside edge to the inside edge of the other side jamb.
- Measure The Height
Take measurements from the threshold up to the head jamb.
- Suppose The Measurements You Have Recorded Aren’t Correct?
What if the measurements for your Markham windows and doors are not precise? Don’t worry. However, if you do decide to go ahead and hire an expert windows installer for your home improvement project, a friendly and courteous windows and doors Markham professional will review and verify all measurements taken before your Markham windows and doors are ordered.
