An exhaust fan is a vital step to maintain fresh air indoors and it ensures the comfort of individuals in a room. Good exhaust fan assists in the elimination of unwanted smell, moisture and mold growth, thus making it a critical necessity in kitchens and bathrooms.
There are various types of fans available; however, we must ensure that the fan is of the correct size and placed in the right area, along with the duct works. Making sure the fan has been installed properly and in the most optimal location is very crucial for its effectiveness. It can be quite tricky to find an experienced electrician Singapore at low cost, focusing on the many available options.
Why you Need an Exhaust Fan?
The primary function of exhaust fans is to pull out impurity and moisture that could lead to mold formation and bad smell. These are common in kitchens where smoke and current cooking activities have bad odors. Bathrooms also have a lot of showers that can increase humidity. If the space has too much high humidity levels, it is best to install an exhaust fan which will ventilate the space. Visit https://www.pshomemaintenance.com/ , where skilled experts demonstrate how or where transformative exhaust fans may be used within your home, putting your safety and comfort first.
Choosing the Right Exhaust Fan
It is essential to make sure that the exhaust fan has been selected for specific needs. There are different types of fans and each is best suited to a certain area. A wall-mounted fan is best for smaller areas whereas a ceiling mounted fan is best suited for bathrooms because they serve to remove moisture from the air. For large areas, inline fans which will be placed in the exhaust duct will be suffice.
Planning the Installation
Important to note however, the position of the fan will also influence its effectiveness. The fan should be placed on a wall that will be close to the source of the moisture or odor such as kitchen, bathrooms, and restaurants. When placing a fan in a kitchen, it would be prudent to install it just above the stove; in a bathroom, the fan should be close to the shower or the toilet.
Gather necessary tools
Preparations for the installation involve gathering the right tools. You will most likely need a screwdriver, drill, ductworks if needed, and electrical tape. Always observe safety standards and building measures when dealing with electric wires.
Ductwork Considerations
The ductwork is very essential when considering the efficiency of your exhaust fan. Due to the fact that airflow is maximized with short and straight duct runs, fans formed by long or twisted ducts tend to be less effective because the air movement is restricted. Where duct runs are required to be longer, maximize the straightness of the ducts to avoid excessive resistance. It is bad practice to use a small duct the noise level will be increased while the performance will go down.
Electrical Safety
Do not forget that safety is the most important factor to consider when installing. Consider working with a licensed electrician if your fan has to be hardwired, unless you are comfortable. In case you intend to plug the fan, make sure that the electrical outlet is appropriate for it, and that it is grounded. You might think about having a timer or switch that operates under humid conditions.
Final Thoughts
There are a number of ways an exhaust fan can be used to improve ventilation and air quality in the home. All it takes is a good choice of the fan, the right preparation of the site, correct consideration, installation process, and proper maintenance. These steps are very important whether or not you wish to employ a technician. Having fitted an exhaust fan properly will also help you avoid mess in your house and ensure that it is safe to be inside it.
